/
/
FCC Gives Small ISPs Relief From U.S. Router Ban Through 2027
US Broadband Regulation

FCC Gives Small ISPs Relief From U.S. Router Ban Through 2027

A new FCC waiver gives qualifying small and rural broadband providers more flexibility to keep certain previously approved routers and gateways in service when components need limited hardware substitutions.

Published: By Justin Wilson

Small and midsized U.S. broadband providers have received temporary relief from one part of the FCC’s foreign-made router restrictions. On September 29, 2026, the Federal Communications Commission’s Office of Engineering and Technology granted NTCA–The Rural Broadband Association and ACA Connects a one-year waiver covering certain hardware changes to previously authorized consumer routers and broadband gateways.

What did the FCC approve?

The FCC’s Office of Engineering and Technology granted an expedited waiver requested jointly by NTCA and ACA Connects. The order, DA 26-1046, temporarily waives parts of Sections 2.932(b) and 2.1043(b) of the Commission’s equipment authorization rules for covered equipment within the scope of the decision.

The relief allows qualifying association members, together with supporting suppliers, equipment grantees and manufacturers, to make targeted Class I and Class II permissive hardware changes to certain previously authorized consumer-grade routers and broadband gateways on the FCC Covered List.

Key details from FCC Order DA 26-1046.
ItemDetailWhy it matters
FCC orderDA 26-1046The formal order granting NTCA and ACA Connects temporary relief.
Release dateSeptember 29, 2026The waiver took effect when the order was released.
ExpirationSeptember 29, 2027The relief is temporary and lasts one year.
EquipmentCovered consumer routers and broadband gatewaysThe waiver concerns previously authorized equipment within the order’s scope.
ReliefTargeted Class I and Class II hardware changesProviders can make permitted substitutions without losing access to the equipment authorization pathway covered by the waiver.

Did the FCC end the U.S. router ban?

No. The new order is a limited waiver, not a repeal of the FCC’s Covered List restrictions.

In March 2026, the FCC added consumer-grade routers produced in foreign countries to its Covered List unless they receive a qualifying Conditional Approval. The FCC said the restriction applies to new device models and does not stop consumers from continuing to use routers they already own or prevent retailers from selling models that had already received FCC authorization before the change.

What the waiver does not do

It does not automatically approve new foreign-made router models, remove all covered routers from the Covered List or give every ISP unrestricted permission to modify equipment.

Why did small and rural ISPs need a waiver?

The request centered on a practical equipment-supply problem. Broadband providers may rely on router and gateway models that were already approved, but individual components inside those devices can become difficult to source or reach end-of-life.

Without regulatory flexibility, replacing a relatively minor component could create problems under the FCC’s permissive-change rules once the underlying router category was placed on the Covered List. NTCA and ACA argued that limited substitutions were needed to prevent supply constraints from interfering with broadband equipment availability.

Supply chainParts can become unavailable

Memory, substrates and other components may need substitutes during a product’s commercial life.

EquipmentExisting gateways still matter

Regional and rural providers often depend on established customer-premises equipment already integrated into their networks.

ContinuityAvoid service disruption

The FCC said the relief can help maintain broadband equipment supply while retaining national-security safeguards.

What router hardware changes can be made?

The order covers targeted Class I and Class II permissive hardware changes rather than a redesign of the router. Reporting on the petition and FCC action identifies examples such as substitutions involving memory modules, substrate materials and certain end-of-life discrete components.

Examples discussed in connection with the waiver include components such as diodes, inductors, crystals and comparable non-radio-frequency parts. The exact modification still has to fit within the scope and conditions of the FCC order and the Commission’s applicable equipment authorization rules.

Memory
Component substitutions

Approved hardware may need alternative memory components when the original part is unavailable.

Materials
Substrate changes

Certain material substitutions can be necessary because of supply constraints or manufacturing availability.

End-of-life parts
Limited discrete components

Some small components may need replacement when suppliers discontinue the original part.

Limits
No unrestricted redesign

The waiver is targeted. Other changes remain subject to the FCC’s normal prohibitions and authorization requirements.

Which ISPs benefit from the FCC waiver?

The order applies to qualifying members covered by the NTCA and ACA Connects petition and identified through the FCC’s order, together with relevant suppliers, grantees and manufacturers supporting the permitted equipment changes.

NTCA represents rural broadband providers, while ACA Connects represents smaller and midsized communications providers, including cable and broadband operators. That makes this waiver particularly relevant to regional and rural networks that may not have the same equipment purchasing scale as the largest national carriers.

Have other broadband companies received similar FCC router waivers?

Yes. The NTCA and ACA action follows a series of similar FCC waivers for other broadband providers, trade groups and equipment manufacturers.

Previous relief has included organizations or companies such as AT&T, NCTA, Verizon, USTelecom, CTIA, Sercomm, Arcadyan, Askey and WNC. The expiration dates and precise conditions differ by order, so one company’s waiver should not be treated as applying automatically to another.

AT&TPrior waiver
NCTAPrior waiver
VerizonPrior waiver
USTelecomPrior waiver
CTIAPrior waiver
AskeyPrior waiver
WNCPrior waiver

What does the router waiver mean for broadband customers?

Most residential customers will not need to take any direct action because of the waiver. Its main effect is behind the scenes: it gives qualifying providers more flexibility to continue sourcing and deploying certain established router and gateway models when relatively small hardware substitutions are necessary.

That can matter to customers if the alternative would be equipment shortages, delayed installations or a forced transition to different hardware. However, the FCC order does not guarantee that a particular ISP will keep a specific router model in stock, and it does not change the retail price of broadband service by itself.

CustomersNo router recall

The broader Covered List action did not require consumers to stop using previously acquired routers.

InstallationsPotentially steadier equipment supply

The waiver is intended in part to reduce the risk of broadband equipment shortages.

SecurityRestrictions still apply

The FCC has kept the underlying Covered List framework and national-security conditions in place.

Why did the FCC restrict foreign-made consumer routers?

On March 23, 2026, the FCC updated its Covered List to include consumer-grade routers produced in foreign countries unless they received Conditional Approval through the applicable federal process.

The Commission said the action followed an Executive Branch national-security determination that foreign-produced consumer routers could create supply-chain and cybersecurity risks. The FCC also stressed that the rule was focused on approval of new covered models and did not prohibit consumers from continuing to use routers they had already purchased.

What happens when the waiver expires in 2027?

The NTCA and ACA Connects waiver is scheduled to expire on September 29, 2027 unless the FCC changes the rules, extends the relief or issues another applicable decision before then.

The Commission has also been considering broader changes to its equipment authorization framework, including proposals related to Covered List equipment and permissive changes. That means the regulatory position could evolve before the one-year waiver reaches its end date.

Ties, the FindCheapBroadband mascot
Ties’ quick recapThe ban remains, but small ISPs have more room to maintain existing equipment.

The waiver is about limited changes to previously authorized routers and gateways, not a blanket approval for new foreign-made router models.

FCC router waiver FAQs

Did the FCC end the U.S. router ban?

No. The FCC waiver does not remove foreign-produced routers from the Covered List or reopen approval for all new foreign-made router models. It provides limited temporary relief for specified hardware changes to certain previously authorized routers and gateways.

How long does the NTCA and ACA router waiver last?

The FCC order was released on September 29, 2026 and grants a one-year waiver through September 29, 2027.

Who benefits from the FCC router waiver?

The relief applies to qualifying NTCA and ACA Connects members covered by the FCC order, together with supporting suppliers, equipment grantees and manufacturers involved in the permitted changes.

What router changes does the waiver allow?

The waiver permits targeted Class I and Class II hardware permissive changes to certain previously authorized covered routers and broadband gateways, subject to the limits and conditions of the FCC order.

Why did small ISPs ask the FCC for relief?

The request cited supply-chain constraints and components reaching end-of-life, which can make it difficult to continue sourcing previously authorized broadband equipment without limited substitutions.

Sources and further reading

Reviewed on 5 October 2026. This article describes a limited FCC equipment-authorization waiver and should not be read as saying that the Covered List restriction itself has been repealed. Individual waiver conditions and equipment eligibility depend on the applicable FCC order.